2018 AIMCAL R2R Europe Conference Agenda
This is the preliminary agenda and is subject to change.
Monday, June 4
|
7:00am - 5:00pm
Full Day Course
|
Registration
|
|
8:30am - 12:00pm
|
Optional Short Course:
Roll-to-Roll Vacuum Deposition Onto Flexible Substrates with Dr. Charles Bishop located in Weihenstephan 2 |
|
10:00am - 10:30am
|
Break
|
|
11:00am - 6:00pm
|
Tabletop Exhibit Setup
|
|
1:30pm - 5:00pm
|
This course has been cancelled.
Optional Short Course: Winding: Improvement Through Science with Dilwyn P. Jones |
|
1:30pm - 5:00pm
|
Optional Short Course:
Flexible Barrier Materials for Vacuum Insulation Panels and Electronic Applications with Esra Kucukpinar located in Weihenstephan 2 |
|
3:00pm - 3:30pm
|
Break
|
|
6:00pm - 8:00pm
|
Opening Reception and Tabletop Exhibits
|
Tuesday, June 5
|
7:00am - 8:30am
|
Breakfast located in Die Molkerei (Included in Room Rate)
Welcome from Milan Moscaritolo, Rol-Vac LLC. and Prof. Langowski, Fruanhofer IVV
|
|
7:00am - 5:00pm
|
Registration
|
Joint Sessions
|
|
8:30am-9:15am
|
In Harmony with the Environment: New Materials and Devices for Harnessing Nature's Energy Flows
Claes G Granqvist, Uppsala University |
|
9:15am - 10:00am
|
The Business Case for Driving Standards in Flexible Electronics
John G Maltabes, Applied Materials Web GmbH |
|
10:00am - 10:30am
10:30am - 11:00am
|
Break
Aproaching Sustainability of Flexible Packaging in the Circular Economy
Vicent Martinez, AIMPLAS |
|
11:00am - 11:45am
|
Global Overview of PET and OPP Films
Robert Gilfillan, PCI |
|
11:45am - 12:30pm
|
Global Trends Relevant to R2R Processing
Max Winograd, Avery Dennison |
|
12:30pm
|
Lunch
|
|
Web Coating and Handling
located in Weihenstephan 1 & 2 |
Vacuum Web Coating
located in Freising 1 & 2 |
|
2:00pm - 2:30pm
|
New Design-Enabling Technologies for Flexible Packaging
Giancarlo Caimmi & Guido Kollbach, Nordmeccanica, Henkel |
OLED Manufacturing on Thin Metal Substrates Towards Roll-to-Roll
C. May, J. Hauptmann, F.Schutze, C. Keibler-Wilner, S. Mogck, Fraunhofer Institute of Organic Electronics, Electon Beam and Plasma Technology FEP |
|
2:30pm - 3:00pm
|
Advances in Slot Die Coating Technology for Hot Melt Adhesives
Mark Miller, Coating Tech Slot Dies |
|
3:00pm - 3:30pm
|
Experimental and Theoretical Studies on the Time-Dependent Permeation Through Multilayered Encapsulation Films for Flexible Organic Electronics
Oliver Miesbauer, TUM Technical University of Munich |
Improved Adhesion Performance and Barrier Functionality of Vacuum Metallized Films Through Hybrid Coating Technology
Carolin Struller & Nick Copeland, Bobst Mancheser Ltd. |
|
3:30pm - 4:00pm
|
Break
|
|
4:00pm - 4:30pm
|
MIDA X, the Next Generation in Optical Inspection - How Today's QC-Systems Can be Made More Powerful Hans Oerley, Dr. Schenk GmbH Industiemesstechnik
|
Monitoring and Control of Vacuum Processes Using a Remote Plasma Emission Spectroscopy Based Sensor
Florian Meyer, Gencoa Ltd. |
|
4:30pm - 5:00pm
|
Process Control of Organic Coatings with the Inline Fluorescence Determination System
Ferdinand Ruess, Fraunhofer IVV |
Feedback Control Loop for R&D Vacuum Coating Tool
Sascha Kreher, Stella Van Eek, Torsten Winkler, FHR Anlagenbau GmbH |
|
5:00pm - 5:30pm
|
Contamination in Battery Manufacture
Sheila Hamilton, Teknek |
Cost-Effective System for Inline Coating Evaluation in R2R Processes
Chris Hellwig, Carl Zeiss Spectroscopy GmbH |
|
5:30pm - 7:30pm
|
Tabletop Reception located in Korbinian 1 & 2
|
Wednesday, June 6
|
7:00am - 8:30am
|
Breakfast located in Die Molkerei (Included in Room Rate)
|
|
7:00am - 12:30pm
|
Registration
|
|
Web Coating And Handling
located in Weihenstephan 1 & 2 |
Vacuum Web Coating
located in Freising 1 & 2 |
|
8:30am - 9:00am
|
Selecting an Unwind and Unwind Splicer System
Bob Pasquale, New Era Converting |
In-Vacuum Flexo Top-Coating on Metallized Film: Commercial Opportunities
Dante Ferrari, Celplast Metallized Products Ltd |
|
9:00am - 9:30am
|
Predicting Web Tension When Faced With Wayward Roll Speeds and Temperatures
Dilwyn Jones, Emral Ltd |
Experimental and Theoretical Studies on the Time-Dependent Permeation Through Multilayered Encapsulation Films for Flexible Organic Electronics
Oliver Miesbauer, Sandra Kiese, Esra Kucukpinar, TUM Technical University Munich, Fraunhofer IVV, Freising |
|
9:30am - 10:00am
|
Monitoring and Evaluation of Nip Alignment in Roll to Roll Printing Process Using Nanocomposite-Based Pressure Sensors
Rajarajan Ramalingame, Technical University of Chemnitz |
Low Cost, High Performance Transparent Barrier Coating on BOPP Using Spatial Atomic Layer Deposition
Bryan Danforth, Lotus Applied Technology |
|
10:00am - 10:30am
|
Break
|
|
10:30am - 11:00am
|
Detection of Dissimilar Effective Diameters of Rollers in Contact by Analyzing the Energy of Values
Sarah Jobst, Technical University of Chemnitz |
|
11:00am - 11:30am
|
Modern Winding Technology for Improved Process Efficiency
Chris Barton, Davis-Standard, LLC/ER-WE-PA |
High Temperature Roll-to-Roll Atomic Layer Deposition of Di-Electric Layers on Metal Foil
Mikko Soderlund, Beneq |
|
11:30am - 12:00pm
|
Improving the Performance of Ceramic Barrier Layers Used in Packaging Materials
Roland Trassl, Applied Materials WEB GmbH |
|
12:00pm - 12:30pm
|
Industrial Roll-to-Roll Systems: Web Defects Analysis Using Finite Element Simulations
Dominique Knittel, University of Strasbourg |
Roll-to-Roll Vacuum Thin Film Technologies for Batteries
Nicolas Schiller, Fraunhofer FEP |
|
2:00pm - 5:00pm
|
Optional Activity: Fraunhofer IVV Facility Tour
Meet in lobby for bus pickup |
Thursday, June 7
|
7:00am - 8:30am
|
Breakfast located in Die Molkerei (Included in Room Rate)
|
|
7:00am - 12:00pm
|
Registration
|
|
Web Coating And Handling
located in Weihenstephan 1 & 2 |
Vacuum Web Coating
located in Freising 1 & 2 |
|
8:30am - 9:00am
|
Coating and Protection of Smoothing Layers by Means of Smoother Webs
Steffen Guenther, Fraunhofer FEP |
Diminishing Resources - A Review of Hubbert & how to be an Ostrich
Dr. Charles Bishop, C.A.Bishop Consulting Ltd |
|
9:00am - 9:30am
|
Atmospheric Plasma Treatment, Effect of the Plasma Chemistry on Adhesion Properties
Nicolas Vandencasteele, Coating Plasma Innovation |
Equipment and Technology for Flexible Electronics Manufacturing in R2R
Christian Perplies, VON ARDENNE GmbH |
|
9:30am - 10:00am
|
Reduction of Ink Misting Through Electrostatic Forces
Lukas Hahne, Eltex Elektrostatik GmbH |
Roll-to-Roll Deposition of Inorganic Layers on ETFE-Film for Electrochromic Applications
Matthias Fahland, Fraunhofer FEP |
|
10:00am - 10:30am
|
Break
|
|
10:30am - 11:00am
|
Multi-Layer Slot Die Coating Technology: An Opportunity to Increase Productivity While Lowering Operational Costs
Jorg Weidauer, Nordson Corporation - Polymer Processing Systems |
Transparent Conductive Films Prepared by Magnetron Sputtering for Solar Applications
Stella van Eek, FHR Anlagenbau GmbH |
|
11:00am - 11:30am
|
Roll-to-Roll Technologies for Hybrid OLED Manufacturing
Robert Abbel, Holst Centre - TNO |
Intelligent Deposition of Thin Layers in a High Vacuum Sputter Web for Solid-State Lithium Battery Applications
Anye Chifen, Buhler |
|
11:30am - 12:00pm
|
Development of High Precision Printing Force Control System for Roll-to-Roll Printing Process
Seung-Hyun Lee, Korea Institute of Machinery and Materials |
Advanced R2R Metallizing for Holographic Packaging & Security
Nadir A G Ahmed, Idvac |
